 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PAA110L DUAL POLE OptoMOS(R) Relay Load Voltage Load Current Max RON PAA110L 400 150 22 Units V mA Description PAA110 is a 400V, 150mA, 22 2-Form-A relay. This performance leader provides high peak load voltage handling capability and improved peak load current handling. Current limiting version is available ("L" suffix, see specification for variations in performance). Features * Small 8 Pin DIP Package * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * 3750VRMS Input/Output Isolation * VDE Compatible * FCC Compatible * No EMI/RFI Generation * Machine Insertable, Wave Solderable * Current Limiting, Surface Mount and Tape & Reel Versions Available Approvals * UL Recognized: File Number E76270 * CSA Certified: File Number LR 43639-10 * BSI Certified: * BS EN 60950:1992 (BS7002:1992) Certificate #:7344 * BS EN 41003:1993 Certificate #:7344 Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hookswitch * Dial Pulsing * Ground Start * Ringer Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment-Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Ordering Information Part # PAA110L PAA110PL PAA110PLTR PAA110LS PAA110LSTR Description 8 Pin DIP (50/Tube) 8 Pin Flatpack (50/Tube) 8 Pin Flatpack (1000/Reel) 8 Pin Surface Mount (50/Tube) 8 Pin Surface Mount (1000/Reel) Pin Configuration PAA110L Pinout AC/DC Configuration + Control - Switch #1 - Control - Switch #1 + Control - Switch #2 - Control - Switch #2 1 2 3 4 8 7 6 5 Load - Switch #1 Load - Switch #1 Load - Switch #2 Load - Switch #2 Switching Characteristics of Normally Open (Form A) Devices 10ms CONTROL + 90% LOAD 10% + TON 10%+ TOFF DS-PAA110L-R4 www.clare.com 1 PAA110L Absolute Maximum Ratings (@ 25 C) Parameter Input Power Dissipation Input Control Current Peak (10ms) Reverse Input Voltage Total Power Dissipation Isolation Voltage Input to Output Operational Temperature Storage Temperature Soldering Temperature DIP Package Flatpack/Surface Mount Package (10 Seconds Max.) 1 2 Min 3750 -40 -40 - Typ Max Units 1501 50 1 5 8002 +85 +125 +260 +220 mW mA A V mW VRMS C C C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Derate Linearly 1.33 mw/C Derate Linearly 6.67 mw/C Electrical Characteristics Parameter Output Characteristics @ 25C Load Voltage (Peak) Load Voltage (Peak) Load Current* (Continuous) AC/DC Configuration Peak Load Current On-Resistance AC/DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Load Current Limiting Capacitance Input to Output Input Characteristics @ 25C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Voltage Reverse Input Current Input to Output Capacitance Input to Output Isolation IL=150mA IF=5mA VR=5V IF IF VF VR IR CI/O VI/O 5 0.4 0.9 3750 0.7 1.2 3 50 1.4 5 10 mA mA V V A pF VRMS 10ms IL=150mA VL=400V IF=5mA, VL=10V IF=5mA, VL=10V 50V; f=1MHz VL VL IL ILPK RON ILEAK TON TOFF COUT ICL 190 18 25 235 3 250 400 150 25 1 1 0.25 280 V V mA mA A ms ms pF mA pF Conditions Symbol Min Typ Max Units *NOTE: If both poles operate simultaneously load current must be derated so as not to exceed the package power dissipation value. 2 www.clare.com Rev. 4 PAA110L PERFORMANCE DATA* 35 30 Device Count (N) PAA110L Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25C) IF = 5mADC 35 30 Device Count (N) PAA110L Typical On-Resistance Distribution (N=50 Ambient Temperature = 25C) (Load Current = 150mADC; IF = 5mADC) PAA110L Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25C) 35 30 Device Count (N) 25 20 15 10 5 0 25 20 15 10 5 0 1.17 1.19 1.21 1.23 1.25 LED Forward Voltage Drop (V) 25 20 15 10 5 0 17.5 18.5 19.5 20.5 21.5 22.5 On-Resistance () 448 456 464 472 480 488 Blocking Voltage (V) PAA110L Typical IF for Switch Operation (N=50 Ambient Temperature = 25C) (Load Current = 150mADC) 25 20 15 10 5 0 1.25 1.55 1.85 2.15 2.45 2.75 LED Current (mA) 25 20 15 10 5 0 PAA110L Typical IF for Switch Dropout (N=50 Ambient Temperature = 25C) PAA110L Typical Turn-On Time (N=50 Ambient Temperature = 25C) (Load Current = 150mADC; IF = 5mADC) 25 20 15 10 5 0 Device Count (N) Device Count (N) 0.95 1.25 1.55 1.85 2.15 2.45 Device Count (N) 0.15 0.21 0.27 0.33 0.39 0.45 LED Current (mA) Turn-On (ms) 25 20 15 10 5 0 PAA110L Typical Turn-Off Time (N=50 Ambient Temperature = 25C) (Load Current = 150mADC; IF = 5mADC) PAA110L Typical Load Current vs. Temperature 250 Load Current (mA) 200 150 100 50 0 Leakage (A) PAA110L Typical Leakage vs. Temperature (Measured across Pins 5 & 6 or 7 & 8) 0.035 0.030 Device Count (N) 0.025 0.020 0.015 0.010 0.005 0 20mA 10mA 5mA 0.045 0.052 0.059 0.066 0.073 -40 -20 0 20 40 60 80 100 120 -40 -20 0 20 40 60 80 100 Turn-Off (ms) Temperature (C) Temperature (C) PAA110L Typical Blocking Voltage vs. Temperature 490 PAA110L Typical Turn-On vs. Temperature (Load Current = 150mADC) 1.50 1.25 1.00 0.75 0.50 0.25 0 -40 -20 0 20 40 60 5mA 10mA 20mA 80 100 Turn-Off (ms) Turn-On (ms) 0.10 0.09 0.08 0.07 0.06 0.05 0.04 0.03 0.02 0.01 0 -40 PAA110L Typical Turn-Off vs. Temperature (Load Current = 150mADC) Blocking Voltage (VRMS) 485 480 475 470 465 460 455 450 445 -40 -20 0 20 40 60 80 100 Temperature (C) 5mA -20 0 20 40 60 80 100 Temperature (C) Temperature (C) The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 4 www.clare.com 3 PAA110L PERFORMANCE DATA* PAA110L Typical LED Forward Voltage Drop vs. Temperature LED Forward Voltage Drop(V) 1.8 1.6 PAA110L Typical Turn-On vs.LED Forward Current (Load Current = 150mADC) 0.30 0.25 Turn-On (ms) PAA110L Typical Turn-Off vs. LED Forward Current (Load Current = 150mADC) 0.070 0.060 Turn-Off (ms) 0.20 0.15 0.10 0.05 0 0 5 10 15 20 25 30 35 40 45 50 0.050 0.040 0.030 0.020 0.010 0 0 5 10 15 20 25 30 35 40 45 50 1.4 1.2 1.0 0.8 -40 -20 0 20 40 60 80 100 120 Temperature (C) 50mA 30mA 20mA 10mA 5mA Forward Current (mA) Forward Current (mA) 30.00 On-Resistance () 25.00 20.00 15.00 10.00 5.00 0 PAA110L Typical On-Resistance vs. Temperature (Load Current = 150mADC; IF = 5mADC) PAA110L Typical IF for Switch Operation vs. Temperature (Load Current = 150mADC) 4.0 3.5 LED Current (mA) 3.0 2.5 2.0 1.5 1.0 0.5 0 LED Current (mA) 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 -40 -20 0 20 40 60 80 100 0 -40 PAA110L Typical IF for Switch Dropout vs. Temperature (Load Current = 150mADC) -40 -20 0 20 40 60 80 100 -20 0 20 40 60 80 100 Temperature (C) Temperature (C) Temperature (C) 150 Load Current (mA) PAA110L Typical Load Current vs. Load Voltage (Ambient Temperature = 25C) IF = 5mADC PAA110L Energy Rating Curve 1.2 1.0 Load Current (A) 0.8 0.6 0.4 0.2 0 10s 100s 1ms 10ms 100ms Time 1s 10s 100s Current (mA) 350.00 300.00 250.00 200.00 150.00 100.00 50.00 0 PAA110L Typical Current Limiting vs. Temperature IF = 5mADC 100 50 0 -50 -100 -150 -2.5 -2.0 -1.5 -1.0 -0.5 0 0.5 1.0 1.5 2.0 2.5 -40 -20 0 20 40 60 80 100 Load Voltage (V) Temperature (C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com Rev. 4 PAA110L Mechanical Dimensions 8 Pin DIP Through Hole (Standard) 7.620 .254 (.300 .010) 3.302 (.130) 9.144 TYP. (.360) 6.350 .127 (.250 .005) 9.652 .381 (.380 .015) 2.540 .127 (.100 .005) PC Board Pattern (Top View) 2.540 .127 8-.800 DIA. (.100 .005) (8-.031 DIA.) 7.620 .127 (.300 .005) 7.239 TYP. (.285) 9.144 .508 (.360 .020) 6.350 .127 (.250 .005) .457 .076 (.018 .003) 8.077 .127 (.318 .005 ) 7.620 .127 (.300 .005) 8 Pin DIP Surface Mount ("S" Suffix) 7.620 .254 (.300 .010) 4.445 .127 (.175 .005) 3.302 (.130) .635 TYP. (.025) .254 TYP. (.010) 6.350 .127 (.250 .005) 9.652 .381 (.380 .015) 2.540 .127 (.100 .005) PC Board Pattern (Top View) 2.540 .127 (.100 .005) 9.525 .254 (.375 .010) 1.905 .127 (.075 .005) .457 .076 (.018 .003) 8.077 .127 (.318 .005) 1.498 .127 (.059 .005) 8.305 .127 (.327 .005) 8 Pin Flatpack ("P" Suffix) 9.652 .381 (.380 .015) 2.540 .127 (.100 .005) PC Board Pattern (Top View) 2.540 .127 (.100 .005) 9.398 .127 (.370 .005) 2.159 TYP. (.085) 7.620 .254 (.300 .010) 6.350 .127 (.250 .005) .203 (.008) .457 .076 (.018 .003) 8.077 .127 (.318 .005) 2.286 MAX. .635 .127 (.090) (.025) 8.763 .127 (.345 .005) 1.193 (.047) .787 (.031) Dimensions mm (inches) Rev. 4 www.clare.com 5 PAA110L Mechanical Dimensions Tape and Reel Packaging for 8 Pin Surface Mount Package 330.2 DIA. (13.00) Top Cover Tape Thickness .102 MAX. (.004) 2.007 .102 1.498 .102 3.987 .102 (.079 .004) (.059 .004) (.157 .004) 6.731 MAX. 1.753 .102 (.265) (.069 .004) .406 MAX. (.016) 7.493 .102 (.295 .004) 12.090 (.476) 4.877 (.192) 1 8 16.002 .305 (.630 .012) 10.300 (.405) Embossed Carrier Top Cover Tape .050R TYP. 11.989 .102 (.472 .004) User Direction of Feed 10.300 .102 (.405 .004) 1.549 .102 (.061 .004) Embossment Tape and Reel Packaging for 8 Pin Flatpack Package 330.2 DIA. (13.00) 2.007 .102 1.498 .102 3.987 .102 (.079 .004) (.059 .004) (.157 .004) Top Cover Tape Thickness .102 MAX. (.004) 6.731 MAX. 1.753 0.102 (.265) (.069 .004) .406 MAX. (.016) 7.493 .102 (.295 .004) 1 8 16.002 .305 (.630 .012) 10.287 (.405) 12.090 (.476) 4.877 (.192) Embossed Carrier Top Cover Tape .050R TYP. 11.988 .102 (.472 .004) User Direction of Feed 10.287 .102 (.405 .004) 1.549 .102 (.061 .004) Embossment Dimensions mm (inches) 6 www.clare.com Rev. 4 Worldwide Sales Offices CLARE LOCATIONS Clare Headquarters 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Clare Micronix Division 145 Columbia Aliso Viejo, CA 92656-1490 Tel: 1-949-831-4622 Fax: 1-949-831-4628 EUROPE European Headquarters CP Clare nv Bampslaan 17 B-3500 Hasselt (Belgium) Tel: 32-11-300868 Fax: 32-11-300890 France Clare France Sales Lead Rep 99 route de Versailles 91160 Champlan France Tel: 33 1 69 79 93 50 Fax: 33 1 69 79 93 59 Germany Clare Germany Sales ActiveComp Electronic GmbH Mitterstrasse 12 85077 Manching Germany Tel: 49 8459 3214 10 Fax: 49 8459 3214 29 Italy C.L.A.R.E.s.a.s. Via C. Colombo 10/A I-20066 Melzo (Milano) Tel: 39-02-95737160 Fax: 39-02-95738829 Sweden Clare Sales Comptronic AB Box 167 S-16329 Spanga Tel: 46-862-10370 Fax: 46-862-10371 United Kingdom Clare UK Sales Marco Polo House Cook Way Bindon Road Taunton UK-Somerset TA2 6BG Tel: 44-1-823 352541 Fax: 44-1-823 352797 ASIA/PACIFIC Asian Headquarters Clare Room N1016, Chia-Hsin, Bldg II, 10F, No. 96, Sec. 2 Chung Shan North Road Taipei, Taiwan R.O.C. Tel: 886-2-2523-6368 Fax: 886-2-2523-6369 SALES OFFICES AMERICAS Americas Headquarters Clare 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Eastern Region Clare P.O. Box 856 Mahwah, NJ 07430 Tel: 1-201-236-0101 Fax: 1-201-236-8685 Toll Free: 1-800-27-CLARE Central Region Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Western Region Clare 1852 West 11th Street, #348 Tracy, CA 95376 Tel: 1-209-832-4367 Fax: 1-209-832-4732 Toll Free: 1-800-27-CLARE Canada Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 http://www.clare.com Clare cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in this Clare product. No circuit patent licenses nor indemnity are expressed or implied. Clare reserves the right to change the specification and circuitry, without notice at any time. The products described in this document are not intended for use in medical implantation or other direct life support applications where malfunction may result in direct physical harm, injury or death to a person. Specification: DS-PAA110L-R4 (c)Copyright 2001, Clare, Inc. OptoMOS(R) is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 6/19/01 |
Price & Availability of PAA110L
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |